Skip to content
Champion Construction Chemicals

Mon - Sat: 7.00am - 19.00pm

A finished bathroom with large-format stone tiles on the floor and walls and a glass shower screen

Solutions

4 solutions · 13 products

Start from the job, not the product. Find what Champion gives you for each stage of construction.

The right product for every stage of construction

From fixing heavy stone on a high-rise to sealing a terrace before the monsoon, each job asks something different of the product. Pick the job below to see what to use and how.

Two Champion applicators pressing a large marble slab onto a wall combed with tile adhesive

01

Tile & stone
fixing

Today's tiles are bigger, heavier and less porous than cement mortar can handle. Five grades of NSA polymer-modified adhesive cover everything from bathroom ceramics to very large Italian stone and ceilings.

Pick by tile size

Indicative tile sizes

  1. 2×2 ft NSA 20-20 C2 T · ceramic, porcelain
  2. 2×4 ft NSA T-20 C2 TE · also tile-on-tile
  3. 2.5×5 ft NSA T-20 Plus C2 TE · vitrified, marble framing
  4. Large format NSA W-20 C2 TE S1 · marble, granite, elevations
  5. Very large format NSA W-20 Plus C2 TE S2 · Italian stone, ceilings

02

Waterproofing

Water does not need a big opening to cause serious damage. Seal terraces, balconies, tanks and basements with a flexible coating, and make repairs bond for good.

  • Terraces
  • Balconies
  • Water tanks
  • Basements

03

Walls, from
block to finish

Three Champion plastering products take a wall from bare blocks to a smooth surface ready for paint. Finish and repair with Champion White Cement.

  1. 01 Lay the blocks

    Champion Block Fix bag

    Block Fix

    Thin 2–3 mm joints for AAC and fly-ash blocks. No curing needed.

  2. 02 Plaster

    Champion Ready Mix Plaster bag

    Ready Mix Plaster

    Just add water. A level, uniform coat of 8–12 mm.

  3. 03 Smooth

    Champion Wall Putty bag

    Wall Putty

    Fills pores and unevenness for a smooth base for paint.

  4. + Finish & repair

    Champion White Cement bag

    White Cement

    Polymer-modified white cement for blocks, bricks and cement plaster: finishing, crack repair and decorative work.

04

Tile
jointing

A tiled surface is only finished when the joints are. Choose by where the tile is and what it has to resist.

A Champion applicator beside a bag of Champion Tile Grout on a polished tiled floor

Tile Grout

For everyday floors and walls

Coloured polymer-modified powder in 24+ colours for strong, neat joints. Water resistant and non-cracking.

  • Bathrooms, showers and kitchens
  • Floors and walls, inside and out
  • 40 kg bag · 40 × 1 kg packs
A Champion applicator finishing the epoxy joints of large marble wall tiles with a grout float

Epoxy Grout

For wet and dry areas, kitchens and hotels

High-strength, water-resistant epoxy for smooth, premium joints that resist stains and chemicals.

  • Bathrooms, kitchens, hotels and malls
  • Stain and chemical resistant
  • 1 kg and 5 kg packs

Project highlight

Hotel Hyatt,
Bharuch

In ten years Champion has been part of thousands of projects. One of them stands out: a landmark requirement of 26,000 bags for Hotel Hyatt, Bharuch. Every successful application strengthened the trust behind it.

26,000

Bags supplied for one project

  • Bharuch Gujarat
  • Since 2016 A decade of trust
Hyatt Place Bharuch: the brick facade with its Hyatt Place sign and the glass tower behind, against a blue sky

Not sure which product?

Get our team
on your site.

Our technical team visits, checks the surface and recommends the right Champion product for the job.

Book a site visit Call us +91 78782 63626